HYDRAULIC TECHNOLOGY INC.
|
HYDRAULIC TECHNOLOGY INC.
|
|
 | Overall Dimensions - 75" long x 47" wide x 62" high; 34" work table height. |
| Tank ID Dimensions - 61" long x 45" wide x 18" deep |
| Radiator Lift Capacity - 650 lbs. |
| Gas pressure requirements - 6.9-13.8 inches water column, 30 CFH each torch. |
| Air Pressure Requirements - 100-150 psi. |
| Gas torches - Permanently attached to machine. Supplied with low, medium and high heating tips. |
| Air Pressure Regulation - 0-150 psi. |
| Air Accessories - OSHA compliant air blow gun on retractable hose and regulated air test hose with test valve. |
| Accessory Adapters - Complete set of plugs and adapters furnished for leak testing different sized radiators. |
| Radiator Brackets - Adjustable bar on lifting platform to hold radiators. |
| Paint - Two coats of MIL-P-24441, 2 part epoxy finish. |
| Approximate Dry Wt. 500 lbs. |
Copyright (c) 1995-2007 - Hydraulic Technology Inc. - All rights reserved |
The Radiator Test and
Repair Stand P/N 8302 meets all requirements of military specification MIL-S-4534C, is
completely self contained and requires only connection to a source of shop air and gas to
place in operation. The unit consists of a freestanding tank which contains a work
platform which may be lowered into the tank for pressure testing radiators. A tool table
and control center is located at the right side of the operator. The control center
has an air supply system for pressure testing and to provide combustion air for the gas
torch. A panel mounted regulator is used to adjust the air pressure. A
lubricator provides lubrication to the platform elevating cylinder and a panel mounted
selector valve is provided to position the work platform as required. The
test stand is constructed from 10 gauge steel, is welded both externally and internally and is
finished
with a water-resistant epoxy coating specifically designed for water tanks.
As with all our test stands, this unit available in