HYDRAULIC TECHNOLOGY INC.
|
HYDRAULIC TECHNOLOGY INC.
|
|
 | Length - 53 ½". |
| Height - 33 ½". |
| Width - 31". |
| Dry Weight - 229 lbs. |
| Reservoir Capacity - 19 gal. |
| Fluid Type - MIL-H-5606 or equiv. |
| Fluid Weight - 125 lbs. |
| Maximum Pressure - 3000 psi. |
Copyright (c) 1995-2007 - Hydraulic Technology Inc. - All rights reserved |
The Hydraulic Filler and
Pressurization Unit, commonly known as a Filler/Bleeder Unit, serves as a
mobile maintenance unit for use in hangars and on flight lines for servicing the hydraulic
systems of aircraft having a system pressure from 0-3000 psi. The Filler/Bleeder is
manufactured in accordance with MIL-F-83766A. The unit is essentially composed of a 19
gallon capacity hydraulic reservoir with inlet and outlet strainers, low pressure transfer
pump, high pressure pump, low and high pressure relief valves, and a 3 micron absolute filter assembly conveniently
located on a three wheeled trailer . A ½" ID x 25ft. long MS28759-8 service hose
with end fittings conforming to MS28760-8 is used to connect the unit to the item being
serviced and is stored in an integral storage cabinet.