Hydraulic Hose Test System

HYDRAULIC TECHNOLOGY INC.

Hydraulic Hose Test System
P/N 9901HT (36x36x15 shown, for other configurations, see Customization Page)

The Hydraulic Hose Test System combines a test chamber with one of our hydrostatic testers as an integral unit. All hose testing connections are inside the hose test chamber and controls outside to protect personnel during testing. The standard hydrostatic test system incorporates a loop arrangement whereby the test fluid is returned to the reservoir, enabling the bleeding of air from the system and the recycling of test fluid. The hydrostatic test chambers are manufactured using 12 gauge stainless steel, providing increased strength over comparable gauge mild steel and avoiding the inevitable chipping, cracking and rust common in painted or powder coated equipment. In addition to hose assemblies, the unit can be used for the hydrostatic testing of virtually anything that requires it. As with all of our equipment, the units can be customized to meet your specific requirements. See the Customization Page.

Specifications:

	Overall Dimensions: 54" Long X 36" Wide X 46" High
	Dry Weight: 265 lbs.
	Test Chamber: 12 gauge brushed stainless, 36" x 36" x 15" deep, venting to rear of chamber, perforated drain trays and 1/4 npt drain
	Polycarbonate shield: 1/2" thick , stainless latches, handle and gas springs
	Stainless work table
	Pressure ranges: 0-1000, 0-2300, 0-6300, 0-10,000, 0-15,000 psi
	Four inch dial gauge with peak read feature, 1% accuracy (optional - 1/2% or 1/4% digital gauge)
	Output Shutoff Valve: Used to isolate test item and gauge from test system
	Bleed valve manifold with integral sight tube
	High pressure hydraulic connections inside chamber
	Inlet Air Requirements: max 8 cfm at 100 psi
	Reservoir Capacity: 5.5 gals.
	Fluid: Water, MIL-H-5606, MIL-H-82382 or other petroleum based fluids. Other fluids by request.
	Variety of optional hose adapters available

Back to Hydrostatic Testers

Hydraulic Hose Test System
P/N 9901HT (36x36x15 shown, for other configurations, see Customization Page)

Specifications:

Overall Dimensions: 54" Long X 36" Wide X 46" High

Dry Weight: 265 lbs.

Test Chamber: 12 gauge brushed stainless, 36" x 36" x 15" deep,
venting to rear of chamber, perforated drain trays and 1/4 npt drain

Stainless work table

Four inch dial gauge with peak read feature, 1% accuracy (optional - 1/2% or 1/4% digital gauge)

Output Shutoff Valve: Used to isolate test item and gauge from test system

Bleed valve manifold with integral sight tube

High pressure hydraulic connections inside chamber

Inlet Air Requirements: max 8 cfm at 100 psi

Reservoir Capacity: 5.5 gals.

Fluid: Water, MIL-H-5606, MIL-H-82382 or other petroleum based fluids.
Other fluids by request.

Variety of optional hose adapters available

Copyright (c) 1995-2007 - Hydraulic Technology Inc. - All rights reserved

Hydraulic Hose Test System P/N 9901HT (36x36x15 shown, for other configurations, see Customization Page)

Specifications:

Overall Dimensions: 54" Long X 36" Wide X 46" High

Dry Weight: 265 lbs.

Test Chamber: 12 gauge brushed stainless, 36" x 36" x 15" deep, venting to rear of chamber, perforated drain trays and 1/4 npt drain

Stainless work table

Four inch dial gauge with peak read feature, 1% accuracy (optional - 1/2% or 1/4% digital gauge)

Output Shutoff Valve: Used to isolate test item and gauge from test system

Bleed valve manifold with integral sight tube

High pressure hydraulic connections inside chamber

Inlet Air Requirements: max 8 cfm at 100 psi

Reservoir Capacity: 5.5 gals.

Fluid: Water, MIL-H-5606, MIL-H-82382 or other petroleum based fluids. Other fluids by request.

Variety of optional hose adapters available

Copyright (c) 1995-2007 - Hydraulic Technology Inc. - All rights reserved

Hydraulic Hose Test System
P/N 9901HT (36x36x15 shown, for other configurations, see Customization Page)

Test Chamber: 12 gauge brushed stainless, 36" x 36" x 15" deep,
venting to rear of chamber, perforated drain trays and 1/4 npt drain

Fluid: Water, MIL-H-5606, MIL-H-82382 or other petroleum based fluids.
Other fluids by request.